|
|
بررسی برهم کنش های مغناطیسی در نانوذرات آلیاژی co2feal با استفاده از آنالیز forc
|
|
|
|
|
نویسنده
|
علی خان زاده آرانی سیما ,پزشکی نژاد زهرا ,الماسی کاشی محمد
|
منبع
|
پژوهش فيزيك ايران - 1398 - دوره : 19 - شماره : 1 - صفحه:69 -74
|
چکیده
|
این مقاله نتایج مطالعه دقیق بر روی رفتار مغناطیسی نانوذرات آلیاژی هویسلر co2feal که به روش هم رسوبی سنتز شده را نشان می دهد. برای این کار از منحنی های مرتبه اول بازگشتی یا forc استفاده شد. نتایج به دست آمده از این آنالیز نشان داد که آلیاژ تهیه شده مخلوطی از دانه های با وادارندگی پایین (~0 hc ) و دانه های تک حوزه با وادارندگی بالا می باشد. کشیدگی نمودار forc در راستای محور hc نشان دهنده وجود یک توزیع گسترده اندازه دانه در محصول می باشد. نانوذراتی کروی شکل با توزیع اندازه ذرات بین 30 تا 90 نانومتر در تصاویر sem و tem نمونه مشاهده شد. مشخص شد بیشترین مقدار مغناطش اشباع (emu/g 91/5) و بیشترین وادارندگی (oe 487) متعلق به نمونه بازپخت شده تا دمای ˚c 700 با آهنگ افزایش دمای ˚c/min10 است.
|
کلیدواژه
|
آلیاژ هویسلر، نانوذراتco2feal، آنالیز forc، روش همرسوبی
|
آدرس
|
دانشگاه کاشان, پژوهشکده علوم و فناوری نانو, ایران, دانشگاه کاشان, پژوهشکده علوم و فناوری نانو, ایران, دانشگاه کاشان, پژوهشکده علوم و فناوری نانو, ایران
|
پست الکترونیکی
|
almac@kashanu.ac.ir
|
|
|
|
|
|
|
|
|
Investigation of the magnetic interactions in Co2FeAl alloy nanoparticles using FORC analysis
|
|
|
Authors
|
Alikhanzadeh-arani S ,Pezeshki-Nejad Z ,Almasi-Kashi M
|
Abstract
|
This paper demonstrates the results of the detailed studying of the magnetic behavior of Co2FeAl alloy nanoparticles synthesized through a coprecipitation method. First order reversal curves (FORCs) diagrams were used consequently. The obtained results showed that the prepared alloys consist of a mixture of the lowcoercivity grains (Hc ~ 0), and interacting singledomain highcoercivity grains. Elongated FORC diagrams along Hc axis indicated a wide particle size distribution in the products. Spherical and uniform nanoparticles with a size distribution of 3090nm were observed in the SEM and TEM images of the synthesized samples. Maximum values of Ms (about 91.5 emu/g), and coercivity (487 Oe) were obtained for the sample synthesized with the optimum annealing conditions up to 700 ̊C with 10 ̊C/min.
|
Keywords
|
Heusler alloy ,Co2FeAl nanoparticles ,FORC analysis ,co-precipitation method
|
|
|
|
|
|
|
|
|
|
|