>
Fa   |   Ar   |   En
   ساخت و مشخصه یابی دمولسیفایر مغناطیسی قابل بازیافت نانوذرات فریت منگنز اصلاح سطح شده با کیتوزان (mnfe2o4 nps@cs) برای امولسیون زدایی امولسیون های نفتی  
   
نویسنده مقدم ایوب
منبع دنياي نانو - 1403 - دوره : 20 - شماره : 77 - صفحه:60 -72
چکیده    بیشتر نفت خام و پسآب نفتی تولید شده از میادین نفتی معمولاً به شکل امولسیون وجود دارد که این موضوع امولسیون زدایی آنها را به یک فرآیند بسیار چالش برانگیز تبدیل می کند. معمولاً از دمولسیفایرهای شیمیایی برای افزایش راندمان امولسیون زدایی استفاده می شود. با این حال، هنوز نیاز مبرمی به توسعه تکنیک‌ها و دمولسیفایرهای کارآمدتر برای برآورده کردن الزامات سازگار با محیط زیست و اقتصادی رقابتی وجود دارد. در این مطالعه، برای مقابله با مشکل آلودگی نفت امولسیون شده با آب، نانوذرات مغناطیسی فریت منگنز (mnfe2o4) به روش همرسوبی سنتز شدند، سپس کیتوزان (cs) روی سطح نانوذرات اعمال شد تا ترکیب mnfe2o4nps@cs به عنوان یک ماده جدید و سازگار با محیط زیست تشکیل شود. در ادامه عملکرد امولسیون زدایی دمولسیفایر جدید سنتز شده که ابرپارامغناطیس و فوق آبگریز است، مورد ارزیابی قرار گرفت. به صورت ویژه، اثرات ph و دوز دمولسیفایر بر راندمان جداسازی امولسیون نفتی مورد مطالعه و بررسی قرار گرفته است. نتایج آنالیز عبور نور نشان داد که دوز بهینه دمولسیفایر برای داشتن ماکزیمم راندمان امولسیون زدایی حدود g/l 0.4 است. علاوه بر این، این ترکیب مصنوعی جدید حداقل 7 چرخه عمر دارد و افزایش چرخه تقریباً هیچ تاثیری بر عملکرد امولسیون زدایی آن ندارد. علاوه بر این، مکانیسم امولسیون زدایی ترکیب نیز مورد بررسی قرار گرفت. نتایج نشان می دهد که نفت امولسیون شده تحت شرایط اسیدی و خنثی از طریق جاذبه الکترواستاتیکی به طور موثری به دمولسیفایرهای mnfe2o4nps@cs چسبیده است.
کلیدواژه امولسیون نفت/آب، امولسیون زدایی، نانوذرات مغناطیسی، ابرپارامغناطیس، فریت منگنز، کیتوزان
آدرس دانشگاه رازی, دانشکده فنی مهندسی, گروه مهندسی مواد و نساجی, ایران
پست الکترونیکی a.moghadam@razi.ac.ir
 
   synthesis and characterization of recyclable magnetic demulsifier of manganese ferrite nanoparticles modified with chitosan (mnfe2o4 nps@cs) for demulsification of oil emulsions  
   
Authors moghadam ayoub
Abstract    most crude oil and petroleum wastewater produced from oil fields are usually in the form of emulsions, which makes their demulsification a high challenging process. usually, chemical demulsifiers are used to increase the efficiency of demulsification. however, there is still an urgent need to develop more efficient processes and demulsifiers to meet the requirements of being environmentally friendly and economically competitive. in this study, to deal with the problem of contamination of emulsified oil with water, magnetic manganese ferrite nanoparticles (mnfe2o4) were synthesized by coprecipitation method, then chitosan (cs) was applied on the surface of nanoparticles to synthesis a new compatible demulsifier of mnfe2o4nps@cs. next, the demulsification performance of the newly synthesized demulsifier, which is superparamagnetic and superhydrophobic, was evaluated. in particular, the effects of ph and demulsifier dosage on oil emulsion separation efficiency have been studied and investigated. the results of light transmission analysis showed that the optimal dose of demulsifier for maximum demulsification efficiency is about 0.4 g/l. furthermore, this new synthetic compound has at least 7 cycle lifetimes, and increasing cycles has almost no effect on its demulsification performance. in addition, the demulsification mechanism of the compound was also investigated. the results show that the emulsified oil effectively adheres to the mnfe2o4nps@cs demulsifiers through electrostatic attraction under acidic and neutral conditions.
Keywords oil/water emulsion ,demulsification ,magnetic nanoparticles ,superparamagnetism ,manganese ferrite ,chitosan
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved