|
|
مدیریت نور در سلول خورشیدی رنگدانهای با استفاده از لایه جابجاکننده طولموج فوتون
|
|
|
|
|
نویسنده
|
حسینی زهرا
|
منبع
|
دنياي نانو - 1400 - دوره : 17 - شماره : 64 - صفحه:18 -27
|
چکیده
|
جابجا کردن طیف نور فرودی بر سلول خورشیدی رنگدانهای راهکاری موثر برای جبران جذب ضعیف رنگدانه در برخی طولموجها محسوب میشود. این کار با استفاده از مواد نورتاب با طیف جذبی مکمل طیف جذب جاذب نور در سلول خورشیدی انجام میشود. همچنین طیف تابش ماده نورتاب باید منطبق بر طول موج جذب سلول خورشیدی باشد. بدین منظور ماده نورتاب در خارج و یا داخل سلول خورشیدی و در ساختارهای مختلف مورد استفاده قرار میگیرد. در این مقاله این راهکار و ملزومات اجرای آن شرح داده شده است.همچنین، ساختارهای ممکن مورد استفاده با این هدف به همراه گروه های مختلف مواد نورتاب معرفی شده است. نتایج ارایه شده در این مقاله نشان می دهد که انتخاب مناسب ساختار و ماده نورتاب مهمترین عوامل در افزایش قابل توجه بازده جذب نور و در نتیجه جریان و بازده سلول خورشیدی هستند.
|
کلیدواژه
|
سلول خورشیدی رنگدانهای، مدیریت نور، جابجایی طول موج فوتون، نقاط کوانتومی، نورتابی
|
آدرس
|
دانشگاه شیراز, دانشکده فناوری های نوین, ایران
|
پست الکترونیکی
|
zahrahosseini@shirazu.ac.ir
|
|
|
|
|
|
|
|
|
Photon Management in Dye Sensitized Solar Cell Using Photon Conversion Layer
|
|
|
Authors
|
|
Abstract
|
Incident photon conversion is an effective strategy to compensate the low absorption in dye sensitized solar cell (DSSC). Photon conversion strategy can be done using luminescent materials. The luminescent material should absorb photons in wavelength range which the DSSC has low external quantum efficiency, while it should emit photons in wavelength range which the DSSC has high external quantum efficiency. This strategy is more applicable to DSSC compared to other kinds of solar cell due to the vast variety of the dye molecules used in DSSC. In addition, the transparency of the DSSC provides the opportunity to apply the photon conversion layer in different architectures; inside or outside the DSSC. In this article, the photon conversion strategy and its requirements are discussed. Different DSSC structures with photon conversion layer and suitable luminescent materials are also introduced. The results show that the choice of the luminescent material for each structure is the most important parameter governing the performance of the DSSC with photon conversion layer
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|