multivariate estimation of rock mass characteristics respect to depth using anfis based subtractive clustering- khorramabad- polezal freeway tunnels

Combination of adoptive network based fuzzy inference system (anfis) and subtractive clustering (sc) has been used for estimation of deformation modulus (em) and rock mass strength (ucsm) considering depth of measurement. to do this, learning of the anfis based subtractive clustering (anfisbsc) was performed firstly on 125 measurements of 9 variables such as rock mass strength (ucsm), deformation modulus (em), depth, spacing, persistence, aperture, intact rock strength (ucsi), geomechanical rating (rmr) and elastic modulus (ei). then, at second phase, testing the trained anfisbsc structure has been perfomed on 40 data measurements. therefore, predictive rock mass models have been developed for 26 variables where model complexity influences the estimation accuracy. results of multivariate simulation of rock mass for estimating ucsm and em have shown that accuracy of the anfisbsc method increases coincident with development of model from 2 variables to 6 variables. according to the results, 3variable model of anfisbsc method has general estimation of both ucsm and em corresponding with 20% to 30% error while the results of multivariate analysis are successfully improved by 6variable model with error of less than 3%. also, dip of the fitted line on data point of measured and estimated ucsm and em for 6variable model approaches about 1 respect to 0.94 for 3 variable model. therefore, it can be concluded that 6variable model of anfisbsc gives reasonable prediction of ucsm and em.