>
Fa   |   Ar   |   En
   مدل سازی سانتریفیوژ شمع بلند تحت بار جانبی با خروج از مرکزیت بار زیاد در ماسه  
   
نویسنده شیرازی شهریار ,مرادی مجید
منبع مهندسي دريا - 1402 - دوره : 19 - شماره : 38 - صفحه:16 -27
چکیده    در این مقاله، پنج آزمایش سانتریفیوژ بارگذاری جانبی شمع بلند با خروج از مرکزیت بار قابل‌ملاحظه در ماسه انجام شده است تا ضمن تعیین منحنی‌های p-y آزمایشگاهی، اثرات تغییرات خروج از مرکزیت بار و تغییرات طول شمع بر رفتار جانبی شمع انعطاف‌پذیر، بررسی شود. مقایسه نتایج آزمایشگاهی با منحنی‌های پیشنهادی api (موسسه نفت آمریکا)، مشخص می‌سازد که آنچه امروزه به‌عنوان تفاوت رفتار مونوپایل‌ها و شمع انعطاف‌پذیر شناخته می‌شود، تا چه میزان می‌تواند تحت تاثیر خروج از مرکزیت بار باشد. علاوه بر آن، کارایی و دقت تجهیزات موجود در دانشگاه تهران نیز موردبررسی قرارگرفته است. نتایج نشان می‌دهد که هرچند خروج از مرکزیت بار بر منحنی‌های p-y تاثیر می‌گذارد، اما رویکرد طراحی فعلی حتی باوجود خروج از مرکزیت بار زیاد، می‌تواند به طراحی قابل‌قبول منجر شود. سختی اولیه در منحنی‌های p-y در اکثر آزمایش‌ها کم‌تر از مقادیر دستورالعمل بوده و مدل هایپربولیک، برآورد نزدیک‌تری به نتایج آزمایشگاهی دارد.
کلیدواژه شمع بلند، بار جانبی، خروج از مرکزیت بار، منحنی p-y، سانتریفیوژ
آدرس دانشگاه تهران, دانشکده مهندسی عمران, ایران, دانشگاه تهران, دانشکده مهندسی عمران, ایران
پست الکترونیکی mmoradi@ut.ac.ir
 
   centrifuge modelling of long piles subjected to lateral loading with high load eccentricity in sand  
   
Authors shirazi shahriar ,moradi majid
Abstract    in this research paper, five centrifuge lateral loading tests of long piles with a considerable load eccentricity were carried out in the sand to investigate the impacts of the load eccentricity and pile length changes on the lateral behavior of a flexible pile beside the determination of experimental p-y curves.comparing experimental test results with the recommended api (american petroleum institute) curves clarifies what is nowadays identified as the difference between the behaviors of monopiles and flexible piles how far can be affected by the load eccentricity. additionally, the efficiency and accuracy of the available equipment at the university of tehran have also been investigated. results show that although the load eccentricity affects p-y curves, the current design approach can lead to a proper design even at high load eccentricities. in most tests, the initial stiffness in p-y curves is lower than that of the guidelines. also, the hyperbolic model shows a closer estimation to the experimental test results.
Keywords long pile ,lateral load ,load eccentricity ,p-y curves ,centrifuge
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved