|
|
هماهنگی حفاظتی ریزشبکه ها با استفاده از مشخصه های دوگانه رله های اضافه جریان جهت دار بر اساس نوع منحنی و نقطه شکست بهینه
|
|
|
|
|
نویسنده
|
عطایی کچویی امیرحسین ,هاشمی دزکی حامد ,کتابی عباس
|
منبع
|
مهندسي برق و الكترونيك ايران - 1402 - دوره : 20 - شماره : 2 - صفحه:111 -130
|
چکیده
|
تغییر در آرایش شبکه و حالات بهره برداری ریزشبکه ها یکی از چالش های اساسی سیستم های حفاظتی است که می توان نقض قیود هماهنگی حفاظتی در برخی از شرایط را به دنبال داشته باشد. علیرغم مزایای متعدد طرح های مبتنی بر بستر ارتباطی و حفاظت تطبیقی، از آن جایی که این گونه طرح های حفاظتی نیاز به زیرساخت های سخت افزاری و نرم افزاری داشته و از سویی ممکن است با مشکلات حملات سایبری یا خرابی سیستم های ارتباطی مواجه شوند، توسعه طرح های بی نیاز از بستر مخابراتی بسیار مورد توجه قرار دارد. در این مقاله، تلاش شده است روشی نوین بر اساس استفاده از رله های حفاظتی اضافه جریان با منحنی مشخصه دوگانه (دوسطحی) ارائه گردد که بدون نیاز به بستر مخابراتی برای حفاظت سریع ریزشبکه در شرایط مختلف بهره برداری مناسب باشد. در پژوهش های ارائه شده موجود، خلاء تحقیقاتی در زمینه بهینه سازی نوع منحنی مشخصه بخش های مختلف منحنی عملکرد دوسطحی رله ها و نقطه شکست بهینه وجود دارد. در روش پیشنهادی، بهینه سازی نوع منحنی مشخصه بخش اول و بخش دوم رله های حفاظتی و نقطه شکست در کنار تنظیمات جریانی و زمانی انجام می گیرد. از نرم افزار digsilent برای انجام مطالعات پخش توان و اتصال کوتاه استفاده شده و حل مسئله بهینه سازی در نرم افزار matlab با کمک الگوریتم ژنتیک پیاده سازی شده است. نتایج پیاده سازی روش پیشنهادی بر روی شبکه های 8 شین ieee و بخش توزیع شبکه 30 شین ieee به ترتیب % 12/42 و % 9/56 بهبود در زمان عملکرد طرح های حفاظتی ایجاد نموده، که دلالت بر مزایای روش پیشنهادی دارد. نتایج نشان می دهد بهینه سازی نوع منحنی مشخصه و نقطه شکست، کارآیی منحنی مشخصه دوسطحی برای حفاظت ریزشبکه در شرایط مختلف بهره برداری را افزایش قابل توجهی خواهد داد.
|
کلیدواژه
|
ریزشبکه، رلههای اضافه جریان جهتدار، هماهنگی حفاظتی بهینه، مشخصه دوگانه (دوسطحی)، شرایط مختلف بهره برداری، انتخاب بهینه نوع منحنی، منحنی مشخصه استاندارد
|
آدرس
|
دانشگاه کاشان, دانشکده مهندسی برق و کامپیوتر, ایران, دانشگاه کاشان, دانشکده مهندسی برق و کامپیوتر, ایران, دانشگاه کاشان, دانشکده مهندسی برق و کامپیوتر, ایران
|
پست الکترونیکی
|
aketabi@kashanu.ac.ir
|
|
|
|
|
|
|
|
|
protection coordination of microgrids using dual setting directional overcurrent relays based on optimal operating characteristics and curve breakpoints
|
|
|
Authors
|
ataee-kachoee amir-hossein ,hashemi-dezaki hamed ,ketabi abbas
|
Abstract
|
the change in network topology and operation modes of microgrids is one of the most crucial challenges for protection systems, which might lead to some coordination constraint violations. although communication-based and adaptive protection schemes have various advantages, because of their required hardware and software infrastructures, the communication-free schemes have received a great deal of attention. the cyber-attacks and failures in communication-based protection schemes highlight the advantages of communication-free systems. in this paper, the main contribution is to develop a new communication-free method using double setting directional overcurrent relays considering different operation modes and network topologies. there is a research gap in developing a method incorporating the optimal selection of relay characteristics and curve breakpoints for dual setting directional overcurrent relays. the proposed method tries to fill such a research gap by proposing a new method using the dual setting relays, while the time settings, current settings, types of relay curves, and curve breakpoints are simultaneously optimized. the microgrids are simulated in digsilent environment, and power flow and short circuit analyses are performed to determine the required data and information for the proposed optimization problem. thus, the proposed optimization problem for protection coordination of microgrids is solved using the genetic algorithm (ga) in matlab. test results of applying the proposed method on the ieee 8-bus and the distribution portion of the ieee 30-bus test systems result in 12.42% and 9.56% improvement in the operating time of the protection system, respectively, that illustrate the advantages of the proposed method. obtained results show that optimizing the curve types for dual setting directional overcurrent relays besides the optimal selection of curve breakpoints significantly improves the performance of the protection schemes using the dual setting characteristics in various operation modes and network topologies.
|
Keywords
|
microgrids ,directional overcurrent relays ,optimal protection coordination ,dual setting characteristics ,different operation modes ,optimal selection of relay curves ,and standard relay characteristics
|
|
|
|
|
|
|
|
|
|
|