>
Fa   |   Ar   |   En
   بکارگیری الگوریتم هوشمند حفاظت در فیدرهای کابلی  
   
نویسنده یوسفی کیا محمد ,غریب رضا احسان
منبع علوم و فنون دريايي - 1399 - دوره : 19 - شماره : 3 - صفحه:39 -51
چکیده    هدف نهایی مجموعه صنعت برق، تامین انرژی مطمئن می‌باشد. از این رو تشخیص درست و بهنگام خطا همواره مهمترین دغدغه بهره‌برداران شبکه برق بوده است. در سال‌های اخیر استفاده از کابل به طور روزافزون افزایش یافته و تشخیص خطا و محل آن را با چالش مواجه ساخته است. چنانچه شبکه کابلی مورد نظر برای کاربردی خاص از جمله کابل اتصال ژنراتور یا شبکه برق صنعتی باشد، اهمیت آن دوچندان خواهد شد و عدم عملکرد به موقع سیستم حفاظتی باعث خسارات جبران ناپذیری می‌شود. در این مقاله روشی برای تشخیص و تعیین محل خطا در کابل با استفاده از الگوریتم ترکیبی تبدیل موجک و شبکه mlp بهینه شده با الگوریتم زنبور ارائه می‌شود. در الگوریتم پیشنهادی برای افزایش قابلیت انتخاب، دو بخش آغازگر و تحلیل پیش بینی شده است. الگوریتم با بهره گیری از نرم افزارهای digsilent و matlab بر روی شبکه کابلی نمونه ی یک کشتی پیاده سازی شده است. نتایج شبیه سازی حاکی از دقت 93 درصدی الگوریتم در تشخیص صحیح محل خطا می‌باشد.
کلیدواژه فیدر کابلی، تبدیل موجک، شبکه Mlp، الگوریتم زنبور، شبکه صنعتی کشتی
آدرس دانشگاه علوم و فنون دریایی خرمشهر, دانشکده مهندسی دریا, گروه الکترونیک و مخابرات دریایی, ایران, شرکت برق منطقه ای خوزستان, ایران
 
   Application of intelligent protection algorithm in cable feeders  
   
Authors Gharibreza Ehsan ,y m
Abstract    The ultimate goal of the electrical industry is to supply reliable energy. Therefore, accurate and on time detection of faults have always been the main concern of electricical utility users. In recent years, the use of cables has grown steadily and has made it difficult to detect faults and locations. If the cable network is intended for a particular application, such as a generator connection cable to industrial power grid, its importance will be increased, and the Lack of timely performance of the protection system will cause irreparable damage. In this paper, a novel method is proposed for detecting and determining the location of faults in cable using a combined wavelet transform algorithm and an optimized MLP network with a bee algorithm. In the proposed algorithm, two initialization modules and prediction analyzes are proposed to increase the selection capability. The algorithm is done by the DigSILENT and MATLAB software and implemented on the ship industrial cable network. The simulation results indicate an accuracy of 93% for the considered algorithm in determining the correct location of the fault.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved