Fluoride Removal from Aqueous Solutions Using Bauxite Activated Mines in Yazd Province (Case Study: Kuhbanan Water)

Introduction: a high concentration of fluoride causes health problems in man. how to remove excess fluoride from water is the objective of this project. the study focuses on an evaluation of the performance of activated bauxite mines in yazd province in order to remove fluoride from drinking water. materials and methods: this study was an experimental one conducted on synthetic samples and water from may to november of 2013 in kuhbanan region at the environmental health engineering research center. bauxite was taken from sadr abad and shomal-e-yazd mines. bauxite analysis was performed using x- rey fraction and xray diffraction. the effects of ph, contact time, adsorbent dose and different concentrations of fluoride on defluoridation were determined. the optimal conditions were performed on real samples. in order to better understand the processes of absorption, synthetic and adsorption isotherms were studied. fluoride content was determined by the spadns method and data analysis was performed by excel. results: the maximum removal efficiency for synthetic solution was obtained by 25g/l bauxite of sadr abad mine and 30g/l bauxite of shomal-e-yazd mine at ph 7, with the contact time of 180 minutes as 75.31% and 59.90%, respectively and the removal efficiency of actual samples in optimum conditions was 51.21% and 36.68%. freundlich isotherm with a correlation coefficient greater than 99% showed better results for both types of bauxite. conclusion: bauxite from sadr abad mine is more efficient than that from shomal-e-yazd mine.