>
Fa   |   Ar   |   En
   بررسی مقایسه‌ای ضرایب فیدبک راکتیویته دمایی در یک رآکتور هسته‌ای آب تحت فشار با خنک‌کننده نانوسیال آلومینا (3o2al) و تیتانیا (2tio)  
   
نویسنده کیانپور رضا ,انصاری‌فر غلامرضا
منبع علوم، مهندسي و فناوري هسته اي - 1400 - دوره : 97 - شماره : 3 - صفحه:119 -128
چکیده    در پژوهش حاضر با استفاده از درصدهای حجمی مختلف و اندازه های متفاوت نانوذرات 2tio (تیتانیا) و 3o2al (آلومینا)، پارامترهای مهم و اساسی رآکتور 1000vver، از جمله پارامترهای دینامیکی رآکتور (نظیر ضرایب راکتیویته دمایی)، که نقش مهمی در تحلیل دینامیکی رآکتور و الزامات ایمنی قلب ایفا می کنند، محاسبه شده است. به این منظور، ابتدا سلول معادل میله سوخت و نانوسیال خنک کننده اطراف آن در مجتمع سوخت شش ضلعی رآکتور 1000vver تعیین شد. سپس محاسبات ترموهیدرولیک در غلظت و اندازه های مختلف نانوذره توسط نرم افزار شبیه ساز ansys fluent انجام شده و تاثیر آنان بر پارامترهای ضریب انتقال حرارت جابه جایی، دمای سوخت و خنک کننده محاسبه گردید. در ادامه با استفاده از کدهای محاسبات نوترونیک wims و citation، قلب رآکتور شبیه سازی شده و تاثیر تغییرات دمای نانوسیال خنک کننده و سوخت بر فاکتور ضریب تکثیر موثر محاسبه و تحلیل شد. بر این اساس، ضرایب راکتیویته دمایی سوخت و خنک کننده تعیین گردید. این ضرایب با تغییرات غلظت و اندازه نانوذرات در سیال خنک کننده محاسبه شده اند.
کلیدواژه رآکتور آب تحت فشار، نانوسیال، ضرایب راکتیویته دمایی، آنالیز نوترونیکی، آنالیزترموهیدرولیکی، ضریب انتقال حرارت جابه‌جایی
آدرس دانشگاه اصفهان, دانشکده فیزیک, ایران, دانشگاه اصفهان, دانشکده فیزیک, ایران
پست الکترونیکی ghr.ansarifar@ast.ui.ac.ir
 
   Comparative investigation of temperature reactivity feedback coefficients in a pressurized water reactor (PWR) with Alumina (Al2O3) and Titania (TiO2) nanofluids as coolant  
   
Authors Kianpour R. ,Ansarifar G.R.
Abstract    In the present work, using different volume percentages and different sizes of TiO2 (Titania) and Al2O3 (Alumina) nanoparticles, the important and essential parameters of VVER1000 reactor, including dynamic parameters of the reactor (such as temperature reactivity coefficients) that play an important role in reactor dynamic analysis and core safety requirements are calculated. For this purpose, at first the equivalent cell of the fuel rod and the surrounding coolant nanofluid in the hexagonal fuel cell of the VVER1000 reactor is determined. After that, thermohydraulic calculations are performed using the ANSYS FLUENT simulator software in different concentrations and sizes of nanoparticles to study their effect on the heat transfer coefficient, fuel, and coolant temperature parameters. Then, using WIMS and CITATION neutron computing codes, the reactor core is simulated. The effect of coolant nanofluid and fuel temperature changes on the effective multiplication factor is calculated and analyzed. The fuel and coolant temperature reactivity coefficients are determined. These coefficients are calculated by varying the concentration and size of nanoparticles in the coolant
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved