>
Fa   |   Ar   |   En
   اندازه‌گیری گاز هیدروژن فلوراید همراه با اورانیم هگزافلوراید با روش طیف‌سنجی زیر قرمز  
   
نویسنده کاظمان عیسی ,آدینه محمد ,خواجه‌زاده علی ,شاه میربرزکی حسین ,چگینی وحید
منبع علوم، مهندسي و فناوري هسته اي - 1399 - دوره : 91 - شماره : 1 - صفحه:192 -197
چکیده    واکنش‌پذیری زیاد ترکیب اورانیوم هگزافلوراید عامل تولید ناخالصی هیدروژن فلوراید در فرایند صنعت غنی سازی می‌باشد. حضور این گاز مزاحم سبب برهم خوردن معادلات غنی سازی اورانیم می‌گردد، به همین دلیل اندازه‌گیری گاز هیدروژن فلوراید در بافت اورانیم هگزا فلوراید به‌عنوان یکی از فاکتورهای مهم در صنعت غنی‌سازی، با استفاده از طیف‌سنجی مادون قرمز صورت گرفته است. با استفاده از سیستم ورودی طراحی شده و سل گازی انعکاسی 10 متری، امکان آنالیز هیدروژن فلوراید در شرایطی بهتر از روش استاندارد astm میسر شد. کاهش چشم گیر میزان مصرف اورانیم هگزافلوراید (به میزان 80 درصد)، حذف به‌کارگیری ازت مایع در آماده‌سازی نمونه، ساده‌سازی روش نمونه‌گیری، از نتایج بهینه‌سازی روش می‌باشد. از بین پنج استاندارد و مقررات بین المللی موجود، ملاحظات استاندارد iso/iec 17025 مد نظر قرار گرفته و پارامترهای صحه‌گذاری از قبیل خطی‌بودن، صحت، دقت، حد تشخیص، حد اندازه‌گیری کمی و عدم قطعیت نتایج نیز برای تاثیر اثر خطاهای موجود مورد بررسی قرار گرفت.
کلیدواژه هیدروژن فلوراید، طیف‌سنجی مادون قرمز، اورانیم هگزافلوراید، صحه‌گذاری
آدرس سازمان انرژی اتمی, شرکت کالا الکتریک, ایران, سازمان انرژی اتمی, شرکت کالا الکتریک, ایران, سازمان انرژی اتمی, شرکت کالا الکتریک, ایران, سازمان انرژی اتمی, شرکت کالا الکتریک, ایران, سازمان انرژی اتمی, شرکت کالا الکتریک, ایران
 
   Determination of Hydrogen Fluoride in Uranium Hexafluoride by FTIR  
   
Authors Kazeman E. ,Adineh M. ,Khagezadeh A. ,Shah mir Barzoki H. ,Chegini V.
Abstract    High reactivity of uranium hexafluride compound is responsible for the impurity production of hydrogen fluoride in the enrichment industry process. The presence of this interference gas will disrupt uranium enrichment process. For this reason, measurement of hydrogen fluoride gas in uranium hexafluoride matrix as one of the important factors in the enrichment industry was carried out by FTIR spectrometry. Using of a new manifold system and a 10 m pathlength reflectance gas cell can lead to perform the analysis of hydrogen fluoride in the easier and more appropriate conditions than the ASTM method. The results obtained from the optimization of the present method are as flow: reduction of utilized UF6 (≈ 80%), elimination of liquid N2 for sample preparation, and simplification of sampling. Among the five standards and international regulations available, the ISO/IEC 17025 standard considerations is used, and verification parameters such as linearity, accuracy, precision, detection limit, quantization limit, and uncertainty of the results for the effect of the existing errors were studied.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved