>
Fa   |   Ar   |   En
   بررسی عملکرد کاتالیست زئولیت در فرایند پیرولیز سلولز  
   
نویسنده محمدلو مرضیه ,قلی زاده مرتضی
منبع شيمي و مهندسي شيمي ايران - 1402 - دوره : 42 - شماره : 2 - صفحه:279 -293
چکیده    از آن جایی که ذخایر نفتی در حال اتمام بوده و یا دارای مقدارهای محدودی می‌باشند، بنابراین منابع نوین انرژی از جمله زیست توده، بایستی مورد بررسی قرار گیرند. سلولز یکی از اجزای اصلی زیست توده است، بنابراین لازم است که پیرولیز آن به‌صورت جداگانه مورد بررسی قرار بگیرد، تا میزان تاثیر آن، در شرایط گوناگون بر فراورده‌ها مشخص شود. شرایط عملیاتی مانند دما، سرعت گرمایش، فشار، زمان ماند، کاتالیست و ... بر فراورده‌های به‌دست آمده از پیرولیز سلولز تاثیر شایان توجهی دارند. در اینجا تاثیر کاتالیست زئولیت a4 به عنوان یکی از کاتالیست‌های رایج در پیرولیز سلولز مورد بررسی قرار گرفت. بدین منظور، در یک  راکتور با اندازه‌های آزمایشگاهی، 15 گرم از سلولز بارگذاری شد و پیرولیز نمونه‌ها در دمای 500 درجه سلسیوس و فشار اتمسفریک انجام پذیرفت. نتیجه‌ها نشان داد که کاتالیست زئولیت a4، باعث افزایش میزان چار از %9.83 به %12.25 و کاهش میزان گاز از %37.05 به %33.83 شد. این در حالی است که میزان تار تغییر چندانی نداشت (53% ~). کاهش فراورده‌های گازی و همچنین افزایش چار، نشان دهنده پلیمریزاسیون مولکول های فرار تولیدی در فرایند پیرولیز کاتالیستی بود. نتیجه‌های به‌دست آمده از آنالیز گاز تولیدی در پیرولیز نشان داد که، گاز به‌دست آمده شامل co و co2 بود که از ترکیب‌های اکسیژن دار موجود در سلولز تولید شدند. بر اساس نتیجه‌ها، فراورده تار به‌دست آمده از پیرولیز سلولز، شامل دو گروه آروماتیکی و آلیفاتیکی بود که در صورت عدم استفاده از کاتالیست زئولیت a4، میزان آلکان ها کاهش یافت. بر اساس نتیجه‌های آنالیز نمونه های چار، اکسیژن زدایی و پلیمریزاسیون در حضور کاتالیست بیش‌تر رخ داد. بر اساس نتیجه‌های آنالیز کاتالیست نیز مقداری کک بر روی کاتالیست تشکیل شد.
کلیدواژه پیرولیز، زیست‌توده، سلولز، زئولیت، فراورده
آدرس دانشگاه تبریز, دانشکده مهندسی شیمی و نفت, ایران, دانشگاه تبریز, دانشکده مهندسی شیمی و نفت, ایران
پست الکترونیکی m.gholizadeh@tabrizu.ac.ir
 
   investigating the performance of zeolite catalyst in cellulose pyrolysis process  
   
Authors mohammadlou marzieh ,gholizadeh mortaza
Abstract    since the oil reserves are expiring or have limited amounts, new sources of energy, including biomass, need to be investigated. cellulose is one of the main components of biomass. it is therefore necessary to examine the effects separately in order to determine its effect under different conditions on the products. operating conditions such as temperature, heating rate, pressure, time, catalyst and etc. on the products derived from pyrolysis of cellulose. here, the effect of a4 zeolite catalyst was investigated as one of the most common catalysts in pyrolysis of cellulose. for this purpose, in a reactor with experimental dimensions, 15 g of cellulose was loaded and the pyrolysis of samples was carried out at 500 ℃ and under atmospheric pressure. the results showed that in the presence of a4 zeolite catalyst, increased the amount of char from 9.83% to 12.25% and decreased the amount of gas from 37.05% to 33.83%. however, the amount of tar was not much changed (∼ 53%). the reduction of gas products, as well as the increase of char, indicated the polymerization of the volatile molecules produced in the catalytic pyrolysis process. the results of the analysis of the gas produced in pyrolysis showed that the resulting gas contains co and co2, which are made of from oxygenated compounds in cellulose. according to the results, the tar product from cellulose pyrolysis included two aromatic and aliphatic groups, which reduced the amount of alkanes if the a4 zeolite catalyst was not used. based on the analysis results of char samples, deoxygenation and polymerization occurred more in the presence of catalyst. based on the results of the catalyst analysis, some coke was formed on the catalyst.
Keywords pyrolysis ,biomass ,cellulose ,zeolite ,the product
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved