|
|
سنتز نانوکامپوزیتی از نانو لوله های کربنی تک دیواره عامل دار شده با نانو ذره های zno در ماتریس پلی متیل متاکریلات و بررسی ویژگی های نوری آن
|
|
|
|
|
نویسنده
|
شفیعی حسنی ساینا ,قاضی طباطبایی زهره
|
منبع
|
شيمي و مهندسي شيمي ايران - 1398 - دوره : 38 - شماره : 3 - صفحه:23 -32
|
چکیده
|
در این پژوهش نانوکامپوزیت هایی از نانولوله های کربنی عامل دار شده باzno بر پایه پلی متیل متاکریلات به عنوان یک عنصر حسگر نوری به روش هم رسوبی تهیه شد، نانو کامپوزیت سنتز شده با آنالیزهای fesem، edx،xrd و ft-ir شناسایی و مشخصه یابی شد. میانگین اندازه نانو ذره های zno دوپه شده در نانولوله های کربنی با استفاده از فناوری xrd حدود nm22 تخمین زده شد. با توجه به کاربرد نانولوله های کربنی به عنوان یک پایه و عنصر اساسی با امکان آشکارسازی بالا در حسگرها، ویژگی های نوری نمونه های تهیه شده با اسپکترو فتومتری uv-vis بررسی شد و نتیجه های به دست آمده نشان داد، استفاده از نانولوله های کربنی عامل دار شده با znoدر ماتریس pmma منجر به بهبود ویژگی های پوشش دهی نانو کامپوزیت در برابر موج uv با کاهش درخشندگی و شفافیت سطح می شود و عبور نور uv برای نمونه به تقریب برابر صفر می شودد.هم چنین طیف بازیابی نمونه ها به کمک طیف نورسنج بازیابی در بازه ی مرئی با طول موج 400 تا nm700 اندازه گیری شد. مقدارهای پارامترهای رنگی مشخص شد و شاخص سیاهی حدود 3.65 برای نمونه ها محاسبه شد و دیده شد مقدار بازتاب در نمونه های دارای نانولوله های کربنی عامل دار شده 50 درصد کاهش داشته است.
|
کلیدواژه
|
متیل متاکریلات، نانولوله های کربنی، روی اکسید، ویژگی های نوری
|
آدرس
|
دانشگاه آزاد اسلامی واحد اهر, گروه شیمی کاربردی, ایران, دانشگاه آزاد اسلامی واحد اهر, گروه شیمی کاربردی, ایران
|
پست الکترونیکی
|
zghazitabatabai@yahoo.com, z_ghazi_tabatabaei@iau-ahar.ac.ir
|
|
|
|
|
|
|
|
|
Synthesis of Nanocomposites of SingleWall Carbon Nanotubes Coated with ZnO Nanoparticles in a Matrix of Poly Methyl Methacrylate and Study of Its Optical Properties
|
|
|
Authors
|
Shafiee Hasani Saina ,Ghazi Tabatabaei Zohreh
|
Abstract
|
In this study, the composites of Single Wall Carbon NanoTubes (SWCNTs) functionalized with zinc oxide nanoparticles based on poly (methyl methacrylate) (PMMA) as an optical sensor were prepared by the coprecipitation method as a part of the optical sensor. Nanoparticles synthesized were identified and characterized by analysis FESEM, EDX, XRD, and FT-IR. The average size of ZnO nanoparticles doped in carbon nanotubes was estimated at about 22nm using XRD techniques. To characterize the optical properties of carbon nanotubes as a base and a basic element with high detection capability in sensors was used UV-vis spectrophotometric and the results showed, the use of carbon nanotubes functionalized with ZnO in the PMMA matrix makes improved coverage properties of nanocomposite against the UV radiation by reducing the gloss and surface clarity and the transmittance of UV radiation was zero. Also, the spectral reflectance values of the prepared samples are measured by a reflectance spectrophotometer in the visible region from 400700 nm. The color parametric values and the blackness index are calculated at about 3.65. It was observed that in the samples containing functional carbon nanotubes the reflectivity was reduced 50% and had a better blackness.
|
Keywords
|
|
|
|
|
|
|
|
|
|
|
|