>
Fa   |   Ar   |   En
   حسگر آمپرومتری بیسفنول a بر پایه نانوورقه های گرافنی دارای نانوذره‌های دو فلزی پلاتین- پالادیوم  
   
نویسنده قاسمی میر شهرام ,حسینی زوارمحله رضا ,حسن پور فائزه ,نبی پور شیما
منبع شيمي و مهندسي شيمي ايران - 1399 - دوره : 39 - شماره : 2 - صفحه:119 -132
چکیده    در این کار پژوهشی، نخست نانو هیبرید ذره های دو فلزی پلاتین پالادیوم/گرافن (ptpd/ergo) بر روی الکترود کربن شیشه ای (gce) تهیه شد و سپس برای اندازه گیری بیس فنول a (bpa) استفاده شد. ریخت شناسی و آنالیز عنصری سطح الکترود اصلاح شده با میکروسکوپی الکترونی نشر میدانی (fesem )،  میکروسکوپی نیروی اتمی (afm) و طیف بینی پراکنش انرژی (eds) مورد مطالعه قرار گرفت. ولتامتری چرخه ای الکترود اصلاح شده در حضور bpa در بافر فسفاتی (8=ph) یک دماغه اکسایشی در  v0.44 نشان داد که بیان کننده فرایند اکسایش برگشت ناپذیر این ترکیب می باشد. هم چنین، نتیجه های به دست آمده از طیف بینی امپدانس الکتروشیمیایی نشان داد که ptpd/ergo، مقاومت انتقال بار کم تری نسبت به gce و ergo/gce دارد. روش آمپرومتری به عنوان یک روش تجزیه ای حساس برای تعیین bpa به کارگرفته شد. یک معادله ی خطی بین جریان دماغه اکسایشی و غلظت bpa  در گستره mm 201.5 5 با حد تشخیص mm 0.75 و حساسیت ma/mm 0.13 به دست آمد. همچنین الکترود اصلاح شده، گزینش پذیری خوبی برای اکسایش الکتروشیمیایی bpa  نشان داد.
کلیدواژه گرافن اکسید کاهش یافته، نانو ذره های دو فلزی، بیس فنول a، آمپرومتری
آدرس دانشگاه مازندران, دانشکده شیمی, ایران, دانشگاه مازندران, دانشکده شیمی, ایران, دانشگاه مازندران, دانشکده شیمی, ایران, دانشگاه مازندران, دانشکده شیمی, ایران
 
   An amperometric sensor for bisphenol A based on graphene nanosheets containing bimetallic PtPd nanoparticles  
   
Authors Ghasemi Mir Shahram ,Hosseini Zavvarmahalleh Sayed Reza ,Hasanpoor Faeze ,Nabipour Shima
Abstract    In this research work, at first, bimetallic PtPd particles/ ERGO nanohybrid was prepared on glassy carbon electrode (GCE) and then was used to determine bisphenol A (BPA). The morphology of modified electrode was studied by using field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and energy dispersive spectroscopy (EDS). Cyclic voltammetry (CV) of modified electrode in the presence of BPA in phosphate buffer indicated an oxidation peak at 0.44 V which means the irreversible oxidation process of this compound. In addition, electrochemical impedance spectroscopy results showed that charge transfer of PtPd/ERGO/GCE is lower than GCE and ERGO/GCE. Amperometric method was applied as a sensitive analytical method for the determination of BPA. A linear relationship between the oxidation peak current and BPA concentration was obtained in the range from 5 to 201.5 µM with a detection limit of 0.75 µM and sensitivity of 0.13 µA µM1. Moreover, the proposed electrode exhibits good selectivity for electrooxidation of BPA.
Keywords
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved