>
Fa   |   Ar   |   En
   ساخت و ارزیابی گرانول های طعم پوشانی شده دیمن هیدرینات با استفاده از روکش پلیمری اودراژیت  
   
نویسنده هادی پور احمد ,سلیمی ندا ,جوادزاده یوسف ,حصاری زهرا
منبع مجله دانشگاه علوم پزشكي گيلان - 1403 - دوره : 33 - شماره : 4 - صفحه:432 -447
چکیده    زمینه: طعم مناسب فرآورده ی دارویی یک فاکتور مهم در تهیه اشکال دارویی خوراکی می‌باشد. یکی از روش های کارآمد برای بهبود طعم فرآورده استفاده از روکش پلیمری است.هدف: در این پژوهش غلظت های مختلف پلیمر اودراژیت e[1] روی گرانول‌های داروی دیمن‌هیدرینات اسپری شد و کارآیی این پلیمر در پوشاندن طعم تلخ دارو بررسی شد.روش‌ها: گرانول‌های دیمن‌هیدرینات با روش گرانولاسیون مرطوب تهیه شدند. پودر دارو با نشاسته و آویسل با نسبت 1 – 0.5 -0.5 به طور یکنواخت مخلوط شد و از محلول hpmc به عنوان چسب گرانول‌سازی استفاده شد. سپس از غلظت‌های %2.5 تا %15 اودراژیت برای روکش کردن گرانول‌ها استفاده و تعداد 4 فرمول تهیه شد. ویژگی‌های جریان‌پذیری گرانول‌ها و میزان بهبود طعم فرآورده ارزیابی شدند. همچنین تست آزاد‌سازی دارو در ph های 6.8 و 1 انجام شد.یافته‌ها: با افزایش ضخامت روکش پلیمری، طعم فرآورده به طور معناداری بهبود یافت (p < 0.05). محلولیت اودراژیت وابسته به ph است که این ویژگی سبب ممانعت از رهش دارو در حفره دهان می‌گردد و دارو در محیط معده آزاد می‌گردد. بیشترین سرعت آزاد‌سازی مربوط به فرمولاسیون 1 (با کمترین ضخامت روکش پلیمری) و کمترین سرعت مربوط به فرمولاسیون 4 (با بیشترین ضخامت روکش پلیمری) بود و پس از گذشت 90 دقیقه بین 84.334-96.359 درصد دارو آزاد شد. ارزیابی فیزیکی گرانول نشان داد که جریان‌پذیری فرمولاسیون بهبود یافت. همچنین بازده تکنیک روکش کردن (pan coating) بین 80 تا 90 درصد در فرمولاسیون‌های مختلف بود.نتیجه‌گیری: : نتایج نشان دادند که اودراژیت e قابلیت پوشاندن طعم نامناسب دارو را دارد. تکنیک های مورد استفاده جهت تهیه‌ کردن گرانول‌ها و روکش‌دهی آنها با هزینه ی کم و به سادگی قابل اجرا می‌باشند، بنابراین قابلیت تولید را در مقیاس صنعتی دارند.
کلیدواژه طعم پوشانی، دیمن هیدرینات، روکش پلیمری، اودراژیت
آدرس دانشگاه علوم پزشکی گیلان, دانشکده داروسازی, گروه فارماسیوتیکس, ایران, دانشگاه علوم پزشکی گیلان, دانشکده داروسازی, گروه فارماسیوتیکس, ایران, دانشگاه علوم پزشکی تبریز, دانشکده داروسازی, گروه فارماسیوتیکس, ایران, دانشگاه علوم پزشکی گیلان, دانشکده داروسازی, گروه فارماسیوتیکس, ایران
پست الکترونیکی z.hesari@gmail.com
 
   fabrication and evaluation of dimenhydrinate taste masked granules using eudragit polymer coating  
   
Authors hadipour kelidsari ahmad ,salimi neda ,javadzadeh yousef ,hesari zahra
Abstract    background: suitable taste is an important factor in the preparation of oral dosage forms. polymer coating is one of the effective methods to improve the taste of the product. objective: different concentrations of eudragit e polymer were sprayed on dimenhydrinate granules and the effectiveness of masking the bitter taste of the drug was investigated.methods: wet granulation method was used to prepare dimenhydrinate granules. the drug powder was uniformly mixed with starch and avicel with a ratio of 0.5-0.5-1 and hpmc solution was used as binder. then concentrations of 2.5%-15% of eudragit e were used to cover the granules and 4 formulations were prepared. the flowability of the granules and the product taste improvement were evaluated. also, the drug release test was performed at ph 6.8 and 1.results: the results of the product taste showed that with the increase in the concentration of the coating polymer, the product taste improves significantly (p < 0.05). solubility of eudragit is ph dependent, hence, prevents the release of the drug in the oral cavity and the drug is released in the stomach environment. the highest release speed was related to formulation 1 (with the lowest thickness of polymer coating) and the lowest speed was related to formulation 4 (with the highest thickness of polymer coating) and after 90 minutes, between 84.334-96.359 % of the drug was released. evaluation of the physical characteristics of the granules showed the flowability of the formulation improved. also, the yield of pan coating technique was between 80 and 90% in different formulations.conclusion: eudragit e has the ability to mask the bitter taste of the drug. the techniques used to prepare the granules and coat them are low-cost and easily applicable, so they can be produced on an industrial scale.
Keywords taste masking ,dimenhydrinate ,polymer coating ,eudragit
 
 

Copyright 2023
Islamic World Science Citation Center
All Rights Reserved